Black Sky 2.0™ Crossbow Vanes
The Black Sky 2.0™ Crossbow Vane is designed specifically for crossbow bolts and will stabilize them for up to 100 yards. You will recognize the profile of the vane as it is the same as the #1 vane in the world, the Blazer Vane. This vane is perfect for crossbows that you do not have issue with vane clearance when shooting. It’s made of an ultra-stiff material that prevents vane flutter for a smooth bolt rotation and a quiet flight. The Black Sky Vane’s ultra-stiff material is durable enough to withstand the high velocities of modern crossbows. The Bolt Vane measures 2.0″ (50.8mm) in length, 0.53″ (13.5mm) in height, and weighs an average of 6.1 grains (395 mg). Like all Bohning vanes, the base of the Bolt Vane is pre-primed for optimal adhesion.
Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning’s Multi-Fletcher or Frontier Jig.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Black Sky 3.0™ Crossbow Vanes
The Black Sky 3.0™ Crossbow Vane is designed specifically for crossbow bolts and will stabilize them for up to 100 yards. This vane was tested and proven in modern high-speed crossbows with tight tolerances for vane height. This vane is a lower profile than the 2.0 and is shield cut. It’s made of an ultra-stiff material that prevents vane flutter for a smooth bolt rotation and a quiet flight. The Black Sky Vane’s ultra-stiff material is durable enough to withstand the high velocities of modern crossbows. The Bolt Vane measures 3.0″ (76.2mm) in length, 0.48″ (12.1mm) in height, and weighs an average of 8.5 grains (551 mg). Like all Bohning vanes, the base of the Bolt Vane is pre-primed for optimal adhesion.
Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning’s Multi-Fletcher or Frontier Jig.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Black Sky 3.0™ TRUEFLETCH
Black Sky 3.0 True Fletch offers a fast and easy way to fletch crossbow bolts and arrows. It fits arrows from 0.219 -0.375 (5.6 – 9.5mm). Slowly submerge in boiling water to apply. Store in a cool place until use. Black Sky True Fletch measures 5 (12.7cm) in length.
The Black Sky vanes on your True Fletch are on a 1° right angle, however, the final angle may vary depending on the method you use to dip the True Fletch into the boiling water. If you submerge it straight down then twist back and forth, the offset will remain at approximately 1° right. Twisting clockwise while submerging the True Fletch provides a 1.5° to 2° right angle, and twisting counter-clockwise provides a 0.5° to 1° right angle.
This is the perfect product to easily refletch your crossbow bolts!