- FLETCH-TITE PLATINUM®
- Application
- Shaft Type
- Clamp Time
- Cure Time
- FLETCH-TITE PLATINUM®
- Vanes, feathers and tapered nocks
- Cedar, Aluminum, Carbon, Wraps and Fiberglass
- 5 Minutes
- 24 hours, but 48 hours is best.
- FLETCHING TAPE
- Features, mylar vanes
- All
- N/A
- Immediate
- BLAZER® BOND
- Vanes, points, inserts, outserts and swedged nocks
- Cedar, Aluminum, Carbon, Wraps and Fiberglass
- 20 Seconds
- 2 hours
- FLETCH FUSE
- Vanes, points, inserts, outserts and swedged nocks
- Cedar, Aluminum, Carbon, Wraps and Fiberglass
- 30 Seconds
- 2 hours
Fletch-Tite® Platinum™
Fletch-Tite Platinum has been the industry standard for over 70 years, and is still the archery industry’s most flexible and durable adhesive! Its flexible bond absorbs shock and won’t crack or become brittle after repeated target impacts. Fletch-Tite Platinum is a solvent-based glue designed for vanes, feathers, and swedged nocks, and it’s perfect for securing the tip & tail of vanes & feathers. It works on all shaft types but is especially recommended for carbon and wood. And clean-up is so easy – excess glue can simply be scraped off with a fingernail. The recommended clamp time is 5 minutes, and cure time is 24 hours (48 hours if environment is humid). For best results, fletch in an environment with low humidity. Do NOT store Fletch-Tite Platinum in the refrigerator. To prevent it from drying out prematurely, ensure cap & tip are tightly sealed. Available in 3/4 oz tubes, pints, quarts, and gallons. Two years expiration on unopened tubes.
BLAZER® BOND
Blazer® Bond is our strongest instant glue, formulated for vanes, points, inserts, outserts, and swedged nocks. It works on all shaft types – carbon, aluminum, fiberglass, wood, and wrapped or crested arrows. It’s Bohning’s most liquid instant glue so it has the fastest dry time – just 20 seconds! Blazer® Bond is fully cured in 2 hours, and it works great in any fletching environment, including humid ones.
Use a thin bead of Blazer® Bond for best adhesion.
To prevent Blazer® Bond from drying out prematurely, store it inside a plastic bag/container in a refrigerator NOT containing food or beverages.
One year expiration on unopened bottles.
Fletch Fuse
Fletch Fuse is Bohning’s budget-friendly instant glue designed for vanes, points, inserts, outserts, & swedged nocks. It works on all shaft types – carbon, aluminum, fiberglass, wood, and wrapped or crested arrows. Fletch Fuse adhesive is slightly thicker and contains more additives than Blazer® Bond. It requires a clamp time of 30 seconds and a cure time of 2 hours.
To prevent Fletch Fuse from drying out prematurely, store it inside a plastic bag/container in a refrigerator NOT containing food or beverages.
One year expiration on unopened bottles.
Fletching Tape®
Bohning’s double-sided Premium Fletching Tape creates a strong, reliable bond on contact.
It is designed for feathers and for mylar vanes and works on all shaft types – carbon, aluminum, fiberglass, wood, and wrapped or crested arrows. Premium Fletching Tape is machine cut without lubricant, so there are no dead zones in the roll. One roll fletches approximately 40 arrows.
Length of tape: 60 feet (18.3m)
Width of tape – 0.188 inches (4.8mm)
No expiration.
- FLETCH-TITE PLATINUM®
- Application
- Shaft Type
- Clamp Time
- Cure Time
- FLETCH-TITE PLATINUM®
- Vanes, feathers and tapered nocks
- Cedar, Aluminum, Carbon, Wraps and Fiberglass
- 5 Minutes
- 24 hours, but 48 hours is best.
- FLETCHING TAPE
- Features, mylar vanes
- All
- N/A
- Immediate
- BLAZER® BOND
- Vanes, points, inserts, outserts and swedged nocks
- Cedar, Aluminum, Carbon, Wraps and Fiberglass
- 20 Seconds
- 2 hours