Fletch three vanes or feathers at once with Bohning’s Tower® Jig! This revolutionary fletching jig provides exceptional adhesion force that is evenly distributed along the base of the vane or feather. You will get consistent angles and perfect 120° spacing. The durable, engineering-grade composite material can be cleaned with acetone to remove adhesive residue. The Tower® Jig is great for single vane repairs too! Available in multiple configurations (see reference chart) for different arrow sizes and fletching angles, from straight fletch up to a 3° right or left helical. All configurations include a base, three sizes of pressure rings to accommodate all arrow diameters, a set of 3 Spacer Plates for an extra .025″ (6mm) of space between the nock and vane, and Clamp Release Tape.COMPLETE: all the available Tower Jig components in one purchase, great for clubs and families.
TRIPLE: Arms – Solid Gray, Black, & Red. Center Posts – F Nock, A Nock, HE, Standard, Crossbow, Pin Nock.HELIX: Arms – Black, Purple. Center Posts – F Nock, A Nock, HE, Standard, Crossbow, Pin Nock.
CROSSBOW: Arms – Black, Red. Center Post – Crossbow
FEATHER: Arms – Blue, Green (arms have wider slots to accommodate feathers). Center Posts – F Nock, Standard, Swedged
MYLAR: Arms – Gray with red clip (accommodates Spin Wing type vanes). Center Posts – F Nock, Standard, Pin Nock.
IMPULSE: Arms – Yellow (arms have narrow slots to accommodate vanes such as Impulse). Center Posts – F Nock, Standard, Pin Nock.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.