Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Fletching Tape Dispenser

    • Easily apply tape to Mylar vanes and feathers • Keeps tape free of dust and debris • Refillable • One roll fletches approximately 3 dozen arrows with 5" fletchings or 9 dozen arrows with 2" fletchings • For use with 720" rolls of tape only (#1649). Learn More
  2. Fletch Fuse

    • Instant glue designed for vanes, points, inserts, swedged nocks, outserts & bushings • Works on all shaft types • Clamp time 30 seconds, cure time 2 hours • 1/2 ounce Learn More
  3. Blazer® Bond

    • Instant glue designed for vanes, points, inserts, swedged nocks, outserts & bushings • Works on all shaft types • Clamp time 20 seconds, cure time 2 hours • Use a very thin bead for best adhesion Learn More
  4. Fletch-Tite Platinum® - Air/Ocean Freight

    **FOR INTERNATIONAL AIR & OCEAN SHIPMENTS** • Solvent based glue designed for vanes, feathers and swedged nocks • Works on carbon, aluminum, wood, fiberglass, wrapped and painted shafts • Clamp time 5 minutes • For best results, let cure 24 - 48 hours • Flexible & durable • NOT recommended for use in high-humidity conditions • 3/4 Ounce Tube Learn More
  5. Premium Fletching Tape

    • Designed for Mylar vanes & feathers • Works on all shaft surfaces • Length - 720" • Width - 0.1875" • Machine cut without lubricant so no dead zones in the roll • One roll fletches approximately 3 dozen arrows with 5" fletchings or 9 dozen arrows with 2" fletchings Learn More
  6. Fletch-Tite Platinum®

    • Solvent based glue designed for vanes, feathers, & swedged nocks • Works on carbon, aluminum, wood, fiberglass, wrapped and painted shafts

    • Clamp time 5 minutes, cure time 48 hours

    • Flexible & durable

    • NOT recommended for use in high-humidity conditions

    • 3/4 Ounce Tube

    Learn More
  7. Fletch-Tite Platinum® Cans

    • Designed for vanes & feather • For fletching on aluminum, carbon, fiberglass & wood shafts • Clamp time 5 minutes, Full cure time 48 hours • Flexible & durable, best in low-humidity conditions • Bond increases over time • Can only ship within the continental US Learn More
  8. Fletch-Tite Platinum® Thinner

    • Formulated for use with Fletch-Tite Platinum® • Never exceed 2% by volume • Can only ship within the continental US Learn More
  9. Ferr-L-Tite®

    • Designed for points & inserts • Recommended for wood and aluminum shafts • Heat reversible for adjustment, replacement or removal • Melting point of 350 F (176.7 C) Learn More
  10. Ferr-L-Tite® CoolFlex™

    • Designed for points, inserts & bushings • Recommended for carbon, aluminum and fiberglass shafts • Accelerate curing speed by dipping in cool water • Reversible with hot water for adjustment, replacement or removal • Melting point of 280 F (137.8 C) Learn More
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction