Alpha Vane & Atlas Vane
The Bohning Alpha and Atlas Vanes are patent pending vanes that will bring your archery to the next level. Both of these new vanes share the same profile but are made in different materials. Click below to learn more.
What is an Alpha Vane?
The Alpha vane by Bohning is a design that combines stealth, speed and torque. The vane is made in our AR1250 material which is the stiffest and quietest we produce. The vane profile has an advanced Torque Apex, which is the position on the vane providing peak rotational torque, combined with a gradual taper to the tail of the vane which creates the optimal balance of spin and stealth. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups.
Bohning’s AR1250 Material is a stiffer material that allows for fast, ultra-quiet flight over longer distances. Our stiffer material also provides maximum speeds when fletched at a 1 degree offset, while staying silent. Bohning AR1250 is also our lightest material.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. We recommend BlazerBond® or Fletch Fuse® adhesives for best adhesion.
Want to try out the Alpha Vane? Fill out the form on this page!
What is an Atlas Vane?
The Atlas vane by Bohning is a design that combines maximum forgiveness with excellent rotational torque. The Atlas profile has an advanced Torque Apex, which is the position on the vane providing peak rotational torque, combined with a gradual taper to the tail of the vane which creates the optimal balance of spin and stealth. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups.
Bohning’s AR1000 Material is Bohning’s original vane material that provides for excellent adhesion and durability, while being extremely forgiving for any potential contact.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. For our most durable and flexible adhesion, Bohning suggests using Fletch-Tite Platinum® for our AR1000 material. If faster cure times are needed, we recommend BlazerBond® or Fletch Fuse® adhesives.
Want to try out the Atlas Vane? Fill out the form on this page!
Click here to add your own text
Would you like to try out a sample of the Alpha and Atlas Vanes?
*US only at this time