Blazer® Quik Fletch
Blazer® Quik Fletch Instructions
Blazer® Quik Fletch installs on any arrow shaft 17/64 to 24/64. For best results submerge the tube completely in boiling water for 10 seconds. For complete adhesion, be certain the entire Blazer® Quik Fletch is completely submerged. This will shrink the tubing to the shaft. Use a smooth motion in and out. Can be used to repair old arrows or fletch new ones at home or in the field. Simple and effective.
Tex-Tite Wax: Not Just for Bowstrings
Tex-Tite ™ is one of the most versatile products in Bohning’s line. Add Tex-Tite ™ to threads of points or broadheads to keep them from loosening up. You can also use Tex-Tite ™ in the barrels (main body) of mechanical broadheads to prevent premature release of broadhead blades prior to impact. This will keep blades from opening up until they are supposed to. Tex-Tite ™ also protects the metal from corrosion.
Crossbownation.com endorses Blazer® Vanes
Jeff Becka of Crossbownation.com has endorsed the Blazer® Vane as being "very well suited for crossbow use". He writes that "With the shorter length of the Blazer vane compared to the 4-5 inch vanes traditionally found on crossbow arrows, the Blazer vane is able to eliminate unwanted or unneeded weight from the rear of the arrow, as a resulte increasing your front of center."
Bohning Pro Staff Tower Jig Demo Video
Bohning Pro Staff Pedro Ampuero from Spain features a demo of the Complete Tower Fletching System at http://www.vimeo.com/22736727
Complete Fletching Guide
The Complete Fletching Guide and Adhesion Brochure. An information packed brochure on fletching and trouble shooting tips.
Spanish - Bohning Pro Staff Tower Instructions
Bohning Pro Staff, Pedro Ampuero, proporciona la instrucción en el sistema completo Torre Fletching at http://www.vimeo.com/22641720.
The acrylic waterborne coating from The Bohning Company.