Sections

Paints and Thinners

French

German

Italian

Spanish

 

Optimal temperature and humidity for use of Fletch-Lac paints or adhesives is <70 degrees F and <65% humidity.

Fletch-Lac is not compatible with polyurethane, Mineral Wax stain or neoprene with rubber.

All Fletch-Lac paints have a shelf life of 2 years from date of manufacture, not including cresting paint (1 oz.) which has a shelf life of 12 months.

Paint available in 1oz., ½pint, pint, quart, and gallon.

Thinners available in pint, quart, and gallon.

  • Metallic Lacquer

    Download TIFF(RGB, 300 DPI, 4664.21kB)

    Download JPG(RGB, 300 DPI, 244.7kB)

    .

    Pin stripes, crests or dips. Easy to apply and creates a brilliant sheen when dried. Dries to a hard, chip resistant finish.
    Two different shades: Gold and Silver

    Back to Top

  • Gloss Lacquer

    Download TIFF(RGB, 300 DPI, 8188.7kB)

    Download JPG(RGB, 300 DPI, 330.3kB)

    .

    Bright, true gloss colors that are easy to apply. Dries to a hard, chip resistant finish.
    Eight colors to choose from: Red, Blue, Yellow, Green, White, Black, Orange, and Flat White.
    (Flat white is a dull finish basecoat that provides maximum vane adhesion).

    Back to Top

  • Fluorescent Lacquer

    Download TIFF(RGB, 300 DPI, 8188.7kB)

    Download JPG(RGB, 300 DPI, 185.86kB)

    .

     

    Two to three times brighter than standard colors, UV stabilized for longer life. Dries to a hard, chip resistant finish. Note: Use a white base coat under all fluorescents.

    Two brilliant colors: Saturn Yellow and Blaze Orange.

     

    Back to Top

  • Fletch-Lac Wood Stains

    Download TIFF(RGB, 300 DPI, 1480.12kB)

    Download JPG(RGB, 300 DPI, 68.67kB)

    .

    Bring out the beauty of your wooden shafts. Available in Walnut Hue

    *More Information
    Carefully stir stain with a wooden stir stick to prevent scraping of can lining. Gently wipe stain on shaft with an up and down motion. Do not use paper towels as they contain detergents and lotions that react with stain. Wipe continually until desired color is achieved. Stains may be dipped or sprayed but solid colors will result from these methods. Bohning stains are formulated to give a shadowing effect to allow the grain to show through. We recommend staining the shaft before dipping in Fletch-Lac clear to seal the wood. Fletch-Lac Super Coat is a perfect gloss protective top coat to finish off your shaft. Be sure to allow 2-3 hours between coats so all solvents can flash off.
    Note: Wood that hasn't been fully dried will cause sap (turpentine) to rise to the surface of the wood when stain is applied. (Durco urethane coating that has been applied before stain will cause the same problem).

    Back to Top

  • Lacquer Thinners

    Download TIFF(RGB, 300 DPI, 5946.81kB)

    Download JPG(RGB, 300 DPI, 289.77kB)

    .

    Chemically engineered to work with all our paints.

    Back to Top

  • Fletch-Lac Super Coat

    Download TIFF(RGB, 300 DPI, 7908.57kB)

    Download JPG(RGB, 300 DPI, 333.58kB)

    .

    Clear lacquer cures to a super hard, protective finish. A one coat sealer for wood shafts. When using Super Coat do not dip over crests.

    Back to Top

  • Fletch-Lac Blue Clear and Clear

    Download TIFF(RGB, 300 DPI, 7908.57kB)

    Download JPG(RGB, 300 DPI, 333.58kB)

    .

    Blue Clear produces sharper, brighter colors. Clear is recommended as a seal coat for wood shafts. Both work great as a base dip for aluminum or carbon shafts, maximizing adhesion. When using Clear or Blue Clear do not dip over crests. We do not recommend thinning Clear or Blue Clear.

    Back to Top

  • Arrow Holder

    Download TIFF(RGB, 300 DPI, 6546.11kB)

    Download JPG(RGB, 300 DPI, 219.93kB)

    .

    Made of sturdy aluminum. Holds shafts stable and separated allowing easy dipping. Dip and hang a dozen shafts. Fits all shaft sizes.

    Back to Top

  • Replacement Gasket

    Download TIFF(RGB, 300 DPI, 4781.51kB)

    Download JPG(RGB, 300 DPI, 191.17kB)

    .

    Replacement gasket is available to hold arrows.

    Back to Top

  • Dip Tanks

    Download TIFF(RGB, 300 DPI, 2348.54kB)

    Download JPG(RGB, 300 DPI, 104.26kB)

    .

    Aluminum tank with a welded, flat base. Holds shafts stable & separated, allowing easy dipping. Dip & hang a dozen arrow shafts. Fits all shaft sizes.

    Back to Top

  • Dip’n Plugz

    Download TIFF(RGB, 300 DPI, 7117.7kB)

    Download JPG(RGB, 300 DPI, 249.29kB)

    .

    Two different sizes. Micro, for smaller ACC style shafts and Max, for Carbon and Uni-bushing style shafts. Tapered vinyl allows you to simply peel paint from surface of the plug and reuse.

    Back to Top

  • Dip Tubes

    Download TIFF(RGB, 300 DPI, 2974.78kB)

    Download JPG(RGB, 300 DPI, 81.39kB)

    .

    One inch plastic tubes for single dips. Cork included. Available in 12" tube.

    Back to Top

  • Replacement Corks

    Download TIFF(RGB, 300 DPI, 3843.86kB)

    Download JPG(RGB, 300 DPI, 181.78kB)

    .

    Available for all sizes of dip tubes.

    Back to Top

  • Paint Caddy

    Download TIFF(RGB, 300 DPI, 6605.13kB)

    Download JPG(RGB, 300 DPI, 323.31kB)

    .

    Holds six 1 oz. jars and 12 brushes.

    Back to Top

  • Cresting Brushes

    Download TIFF(RGB, 300 DPI, 6188.77kB)

    Download JPG(RGB, 300 DPI, 195.92kB)

    ..

    High quality, camel hair brushes. Fine Point for pin striping, 1/4", 1/8" and 1/2".

    Back to Top

  • Arrow Pads

    Download TIFF(RGB, 300 DPI, 9569.54kB)

    Download JPG(RGB, 300 DPI, 387.41kB)

    ..

    Two styles of arrow pads for today's fast changing arrow shaft market. Includes two pads. Universal: For large or small diameter shafts. Standard: For mid-range diameter shafts.

    Back to Top

  • Universal Arrow Box

    Download TIFF(RGB, 300 DPI, 6220.39kB)

    Download JPG(RGB, 300 DPI, 259.31kB)

     .

    Industry standard arrow box. Fits both 34" and 36" arrow shafts. Great for arrow storage, shipping or showcasing.

    Back to Top

  • Clamp Release Tape

    Download TIFF(RGB, 300 DPI, 8455.02kB)

    Download JPG(RGB, 300 DPI, 218.02kB)

    .

    Apply tape clamps to prevent adhesive build-up. One pair.

    Back to Top

  • Platinum & Fletch-Tite Thinners

    Download TIFF(RGB, 300 DPI, 5946.81kB)

    Download JPG(RGB, 300 DPI, 289.77kB)

    .

    Chemically engineered to work with Platinum and Fletch-Tite adhesives.

    Back to Top