Accessories
- Broadhead Wrench
- Shooters Belt
- Accessory Bag
- Braided Leather Wrist Sling
- Bow Grip and Sight Window Pad
- Bow Holster
- Three Strap Arm Guard
- Shrink-Tite
- Cable Slide
- Kisser Button
- Wind-Check
- String Whiskers
- Bow Hunter’s Gear Belt
- Hunter Peep
- Thread Tite
- The “Z” Point
- String Nocks
- Feather Dri
- Serve-Tite String Sever
- Serving Thread
- Self-Serve Cable Spreader
- String Separator
- Bohning “All In One” Serving Kit
- Alcohol Burner
- Extra Wick for Alcohol Burner
- SSR Arrow Shaft Surface Cleaner
- Arrow Cresting Kit
- Arrow Fletching Kit
- Arrow Holder
- Replacement Gasket
- Dip Tanks
- Dip’n Plugz
- Dip Tubes
- Replacement Corks
- Paint Caddy
- Cresting Brushes
- Arrow Pads
- Universal Arrow Box
- Bohning Fletching Jig
- Clamp Release Tape
- The Tower Fletching Jig
- Pro Crester
- Standard Crester
- Carbon Arrow Everything
-
Broadhead Wrench
Download TIFF(RGB, 300 DPI, 9524.42kB)
Download JPG(RGB, 300 DPI, 267.2kB)
Back to Top
Three or four blade broadhead configurations. Easy grip construction molded from high impact plastic. The wrench protects fingers and hands while removing or installing broadheads.
-
Shooters Belt
Download TIFF(RGB, 300 DPI, 6374.68kB)
Download JPG(RGB, 300 DPI, 311.86kB)
Back to Top
Top notch 3D shooters belt. This belt won't droop or lose its shape after a day on the range. Provides back support and enough room to hang needed accessories.Available in Small, Medium, Large, X-Large, and XX-Large.
Waist sizes are:
Small (28"-32")
Medium (33"-36")
Large (37"-40")
X-Large (41"-44")
XX-Large (45"- 48") -
Accessory Bag
Download TIFF(RGB, 300 DPI, 8417.99kB)
Download JPG(RGB, 300 DPI, 473.14kB)
Back to Top
Collapsible throat accessory bag that easily adapts to belt. Reinforced mouth stays open for quick access. Made from durable cordura. A great place to store your relase. Available in black and blue. -
Braided Leather Wrist Sling
Back to TopDownload TIFF(RGB, 300 DPI, 4986.91kB)
Download JPG(RGB, 300 DPI, 160.33kB)
-
Bow Grip and Sight Window Pad
Download TIFF(RGB, 300 DPI, 8029.57kB)
Download JPG(RGB, 300 DPI, 318.58kB)
Back to Top
4"x 6" mole skin camo pads with self-adhesive backing. Use on grip, sight window or any spot that needs camp, silencing or warmth. Simply cut to fit. Two pads per package. Avaiable in Mossy-Oak® Break-up®.
-
Bow Holster
Download TIFF(RGB, 300 DPI, 6675.13kB)
Download JPG(RGB, 300 DPI, 183.1kB)
Back to Top
Easy-snap adjustment. Made of durable cordura Mossy-Oak® Break-up®. Large pocket for single cam bows. Easily mounts to any belt.
-
Three Strap Arm Guard
Back to TopDownload TIFF(RGB, 300 DPI, 9017.37kB)
Download JPG(RGB, 300 DPI, 183.1kB)
-
Shrink-Tite
Download JPG(RGB, 300 DPI, 203.65kB)
Back to Top
Gives arrow rest fingers a rubber skin that prevents arrow shaft noise as the bow is drawn. Two per package.
-
Cable Slide
Back to TopDownload JPG(RGB, 300 DPI, 165.03kB)
-
Kisser Button
Back to TopDownload JPG(RGB, 300 DPI, 178.36kB)
-
Wind-Check
Download JPG(RGB, 300 DPI, 200.3kB)
Back to Top
A fine, odorless powder. Will detect even the slightest air currents, Enough for 250 applications. Environmentally safe.
-
String Whiskers
Download JPG(RGB, 300 DPI, 173.67kB)
Back to Top
String whiskers are a proven method of dampening string noise and oscillations, simply tie onto bowstring.
-
Bow Hunter’s Gear Belt
Download JPG(RGB, 300 DPI, 315.61kB)
Back to Top
A new wider, heavy duty, quick disconnect waist belt, fully adjustable and padded for back support. Reinforced zippers for durability and embroidered Bohning logo. Constructed from a quiet, durable camouflage material.
-
Hunter Peep
Download TIFF(RGB, 300 DPI, 9330.91kB)
Download JPG(RGB, 300 DPI, 237.53kB)
Back to Top
Standard 3/8" sight orifice. Allows maximum sight window for low light conditions, also comes with alignment tube.
-
Thread Tite
Back to TopDownload TIFF(RGB, 300 DPI, 5431.07kB)
Download JPG(RGB, 300 DPI, 188.63kB)
-
The “Z” Point
Download TIFF(RGB, 300 DPI, 8660.31kB)
Download JPG(RGB, 300 DPI, 277.02kB)
Back to Top
A "cooling" taper design allows the target to cool as the arrow enters. This design eases shaft removal form all styles of foam targets. Guaranteed to be within (+/-) 1 grain. The "Z" Point comes in two diameters 19/64 and 21/64 and three weight choices 85 grain, 100 grain and 125 grain.
While Supplies Last
-
String Nocks
Back to TopDownload TIFF(RGB, 300 DPI, 8968.52kB)
Download JPG(RGB, 300 DPI, 404.61kB)
-
Feather Dri
Download TIFF(RGB, 300 DPI, 5171.05kB)
Download JPG(RGB, 300 DPI, 218.11kB)
Back to Top
Water repellent powder for feathers. Simply shake feathers around in powder and go. Colorless, odorless and will not affect feather adhesion.
-
Serve-Tite String Sever
Download TIFF(RGB, 300 DPI, 8785.63kB)
Download JPG(RGB, 300 DPI, 250.03kB)
Back to Top
Adjustable tension and smooth thread flow. Excellent for quick, tight center servings. Now with larger top feeder hole and a bushing to ease threading and prevent wear.
-
Serving Thread
Download TIFF(RGB, 300 DPI, 7862.23kB)
Download JPG(RGB, 300 DPI, 403.69kB)
Back to Top
Three great serving thread choices. Nylon-economical, Poly Grip- Superior grip, #62 Braid- Superior Grip and Durability.
-
Self-Serve Cable Spreader
Download TIFF(RGB, 300 DPI, 5347.08kB)
Download JPG(RGB, 300 DPI, 160.96kB)
Back to Top
Makes serving you bowstring easy. Provides a large work area, keeping cables down and out of your way. Bowstring cables are held securely in top and bottom slots.
-
String Separator
Download TIFF(RGB, 300 DPI, 7641.57kB)
Download JPG(RGB, 300 DPI, 208.55kB)
Back to Top
Easily inserts between bowstring strands. A simple twist separates the string. The bowstring fits into the slot, providing a user friendly work area.
-
Bohning “All In One” Serving Kit
Download TIFF(RGB, 300 DPI, 7725.62kB)
Download JPG(RGB, 300 DPI, 407.19kB)
Back to Top
Kit includes: Self-Serve Cable Spreader, String Separator, Serve-Tite Serving Tool with Poly grip serving thread and an instructional DVD that takes you step-by-step through the serving procedure.
-
Alcohol Burner
Back to TopDownload TIFF(RGB, 300 DPI, 8867.7kB)
Download JPG(RGB, 300 DPI, 255.9kB)
-
Extra Wick for Alcohol Burner
Replacement wick for our alcohol burner.Back to Top -
SSR Arrow Shaft Surface Cleaner
Download TIFF(RGB, 300 DPI, 8780.09kB)
Download JPG(RGB, 300 DPI, 293.63kB)
Back to Top
A high strength cleaner designed for today's new anodizing processes. Degreases and prepares aluminum and carbon shafts. Just add hot tap water to activate powder. Not for use on wood shafts.
*More Information
SSR cleans as well as degreases shafts.
To prepare shafts:
Allow shaft to soak in SSR for 5 minutes
Rinse thoroughly with HOT tap water (be sure to remove all SSR or else the paint/vanes will not adhere).
Air dry.
Note: Do not touch the shaft where you intend to paint. This will leave oil on the arrow and the paint may not adhere.
SSR does "etch" the shaft a little and this helps the paint to stick. -
Arrow Cresting Kit
Download TIFF(RGB, 300 DPI, 3219.84kB)
Download JPG(RGB, 300 DPI, 342.27kB)
Back to Top
Here is everything you need to finish the job. Kit Includes: 300 rpm Standard Crester, dip tube, 16 oz. Fletch-Lac Thinner, 6 cresting colors, paint caddy, 8 oz. white lacquer, set of arrow holders, 2 camel hair brushes, 16 oz. of SSR shaft cleaner, and Arrow Building DVD (VHS available upon request).
-
Arrow Fletching Kit
Download TIFF(RGB, 300 DPI, 7192.84kB)
Download JPG(RGB, 300 DPI, 351.96kB)
Back to Top
Everything you need to fletch arrows. Kit includes: Blazer™ vanes, Blazer nocks, Fletch-Tite Platinum, Bohning Pro Class Fletching Jig, SSR Shaft Cleaner and an Arrow Building DVD. Clamp available in straight, left, or right helical.
Now In A Plano® Hard Case So It Can
Easily Accompany You In The Field!
-
Arrow Holder
Download TIFF(RGB, 300 DPI, 6546.11kB)
Download JPG(RGB, 300 DPI, 219.93kB)
Back to Top
Made of sturdy aluminum. Holds shafts stable and separated allowing easy dipping. Dip and hang a dozen shafts. Fits all shaft sizes.
-
Replacement Gasket
Back to TopDownload TIFF(RGB, 300 DPI, 4781.51kB)
Download JPG(RGB, 300 DPI, 191.17kB)
-
Dip Tanks
Download TIFF(RGB, 300 DPI, 2348.54kB)
Download JPG(RGB, 300 DPI, 104.26kB)
Back to Top
Aluminum tank with welded flat base for dipping multiple shafts. Designed specifically to accept the Model 12 arrow holder. 12" deep.
-
Dip’n Plugz
Download TIFF(RGB, 300 DPI, 7117.7kB)
Download JPG(RGB, 300 DPI, 249.29kB)
Back to Top
Two different sizes. Micro, for smaller ACC style shafts and Max, for Carbon and Uni-bushing style shafts. Tapered vinyl allows you to simply peel paint from surface of the plug and reuse.
-
Dip Tubes
Back to TopDownload TIFF(RGB, 300 DPI, 2974.78kB)
Download JPG(RGB, 300 DPI, 81.39kB)
-
Replacement Corks
Back to TopDownload TIFF(RGB, 300 DPI, 3843.86kB)
Download JPG(RGB, 300 DPI, 181.78kB)
-
Paint Caddy
Back to TopDownload TIFF(RGB, 300 DPI, 6605.13kB)
Download JPG(RGB, 300 DPI, 323.31kB)
-
Cresting Brushes
Back to TopDownload TIFF(RGB, 300 DPI, 6188.77kB)
Download JPG(RGB, 300 DPI, 195.92kB)
-
Arrow Pads
Download TIFF(RGB, 300 DPI, 9569.54kB)
Download JPG(RGB, 300 DPI, 387.41kB)
Back to Top
Two styles of arrow pads for today's fast changing arrow shaft market. Includes two pads. Universal: For large or small diameter shafts. Standard: For mid-range diameter shafts.
-
Universal Arrow Box
Download TIFF(RGB, 300 DPI, 6220.39kB)
Download JPG(RGB, 300 DPI, 259.31kB)
Back to Top
Industry standard arrow box. Fits both 34" and 36" arrow shafts. Great for arrow storage, shipping or showcasing.
-
Bohning Fletching Jig
Download TIFF(RGB, 300 DPI, 8172.37kB)
Download JPG(RGB, 300 DPI, 305.83kB)
Back to Top
Prefect fletch every time! Quick-set magnetic clamp with larger clamp grips for easier operation, easy off-set adjustment and accurate snap indexing. Clamps available in straight, right and left helical.
-
Clamp Release Tape
Back to TopDownload TIFF(RGB, 300 DPI, 8455.02kB)
Download JPG(RGB, 300 DPI, 218.02kB)
-
The Tower Fletching Jig
Download TIFF(RGB, 300 DPI, 7158.82kB)
Download JPG(RGB, 300 DPI, 218.75kB)
Back to Top
Save time & increase production!
Accommodates all:
• standard carbon • small diameter carbon
• large diameter carbon & aluminum!
• Easy operation!
"Just flip the switch and feel the power!"
Places 3 vanes on a 2˚ offset, perfectly 120˚ apart!
Comes with 2 Pressure rings allowing you to apply the
perfect amount of pressure on different diameter shafts! Red ring for standard carbon & small diameter shafts, black ring for aluminum & larger diameter carbon arrow shafts!
-
Pro Crester
Back to TopDownload TIFF(RGB, 300 DPI, 5270.02kB)
Download JPG(RGB, 300 DPI, 184.56kB)
-
Standard Crester
Download TIFF(RGB, 300 DPI, 9407.32kB)
Download JPG(RGB, 300 DPI, 280.37kB)
Back to Top
110 volt AC, 60 cycle, 300 RPM motor holds arrow shaft 1 1/4" abve the table top for easy cresting.
-
Carbon Arrow Everything
Download TIFF(RGB, 300 DPI, 5571.05kB)
Download JPG(RGB, 300 DPI, 494.43kB)
Back to Top
Join Tom Nelson of the American Archer, Lennie Rezmer from Carbon Express, Dale Voice and Stacey Randall from Bohning Archery taking you through the entire arrow building process. Start with shaft selection, cutting shafts, installing inserts, prepping shafts, and nock and vane selection. Then move on to choosing an adhesive, arrow wraps and choosing a fletching jig. Finish with step by step fletching instructions using both the Tower and Pro Class fletching jigs. Along the way check out the independent vane group test. Watch the Blazer® vane out perform the top three competitors broadhead vanes...in slow motion...Good Stuff!
Run time 1 hour 22 minutes













